From dfc4ece4083bbbb98f55291d05e7d2b1513464b7 Mon Sep 17 00:00:00 2001
From: Thomas Pummer <dev@nullpointer.at>
Date: Fri, 22 Feb 2013 11:10:11 -0500
Subject: [PATCH] the display-name in web.xml now shows the actual version of Gitblit

---
 distrib/gitblit.properties |  758 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 749 insertions(+), 9 deletions(-)

diff --git a/distrib/gitblit.properties b/distrib/gitblit.properties
index 0048e55..f5cc19b 100644
--- a/distrib/gitblit.properties
+++ b/distrib/gitblit.properties
@@ -1,14 +1,43 @@
 #
+# Gitblit Settings
+#
+
+# This settings file supports parameterization from the command-line for the
+# following command-line parameters:
+#
+#   --baseFolder    ${baseFolder}    SINCE 1.2.1
+#
+# Settings that support ${baseFolder} parameter substitution are indicated with the
+# BASEFOLDER attribute.  If the --baseFolder argument is unspecified, ${baseFolder}
+# and it's trailing / will be discarded from the setting value leaving a relative
+# path that is equivalent to pre-1.2.1 releases.
+#
+# e.g. "${baseFolder}/git" becomes "git", if --baseFolder is unspecified 
+#
 # Git Servlet Settings
 #
 
-# Base folder for repositories
+# Base folder for repositories.
+# This folder may contain bare and non-bare repositories but Gitblit will only
+# allow you to push to bare repositories.
 # Use forward slashes even on Windows!!
 # e.g. c:/gitrepos
 #
 # SINCE 0.5.0
 # RESTART REQUIRED
-git.repositoriesFolder = git
+# BASEFOLDER
+git.repositoriesFolder = ${baseFolder}/git
+
+# Build the available repository list at startup and cache this list for reuse.
+# This reduces disk io when presenting the repositories page, responding to rpcs,
+# etc, but it means that  Gitblit will not automatically identify repositories
+# added or deleted by external tools.
+#
+# For this case you can use curl, wget, etc to issue an rpc request to clear the
+# cache (e.g. https://localhost/rpc?req=CLEAR_REPOSITORY_CACHE)
+#
+# SINCE 1.1.0
+git.cacheRepositoryList = true
 
 # Search the repositories folder subfolders for other repositories.
 # Repositories MAY NOT be nested (i.e. one repository within another)
@@ -19,6 +48,34 @@
 # SINCE 0.5.0
 git.searchRepositoriesSubfolders = true
 
+# Maximum number of folders to recurse into when searching for repositories.
+# The default value, -1, disables depth limits.
+#
+# SINCE 1.1.0
+git.searchRecursionDepth = -1
+
+# List of regex exclusion patterns to match against folders found in
+# *git.repositoriesFolder*.
+# Use forward slashes even on Windows!!
+# e.g. test/jgit\.git
+#
+# SPACE-DELIMITED
+# CASE-SENSITIVE
+# SINCE 1.1.0
+git.searchExclusions =
+
+# List of regex url patterns for extracting a repository name when locating
+# submodules.
+#   e.g. git.submoduleUrlPatterns = .*?://github.com/(.*) will extract
+#   *gitblit/gitblit.git* from *git://github.com/gitblit/gitblit.git*
+# If no matches are found then the submodule repository name is assumed to be
+# whatever trails the last / character. (e.g. gitblit.git).
+#
+# SPACE-DELIMITED
+# CASE-SENSITIVE
+# SINCE 1.1.0
+git.submoduleUrlPatterns = .*?://github.com/(.*)
+
 # Allow push/pull over http/https with JGit servlet.
 # If you do NOT want to allow Git clients to clone/push to Gitblit set this
 # to false.  You might want to do this if you are only using ssh:// or git://.
@@ -27,6 +84,351 @@
 #
 # SINCE 0.5.0
 git.enableGitServlet = true
+
+# If you want to restrict all git servlet access to those with valid X509 client
+# certificates then set this value to true.
+#
+# SINCE 1.2.0
+git.requiresClientCertificate = false
+
+# Enforce date checks on client certificates to ensure that they are not being
+# used prematurely and that they have not expired.
+#
+# SINCE 1.2.0
+git.enforceCertificateValidity = true
+
+# List of OIDs to extract from a client certificate DN to map a certificate to
+# an account username.
+#
+# e.g. git.certificateUsernameOIDs = CN
+# e.g. git.certificateUsernameOIDs = FirstName LastName
+#
+# SPACE-DELIMITED
+# SINCE 1.2.0
+git.certificateUsernameOIDs = CN
+
+# Only serve/display bare repositories.
+# If there are non-bare repositories in git.repositoriesFolder and this setting
+# is true, they will be excluded from the ui. 
+#
+# SINCE 0.9.0
+git.onlyAccessBareRepositories = false
+
+# Allow an authenticated user to create a destination repository on a push if
+# the repository does not already exist.
+#
+# Administrator accounts can create a repository in any project.
+# These repositories are created with the default access restriction and authorization
+# control values.  The pushing account is set as the owner.
+#
+# Non-administrator accounts with the CREATE role may create personal repositories.
+# These repositories are created as VIEW restricted for NAMED users.
+# The pushing account is set as the owner.
+#
+# SINCE 1.2.0
+git.allowCreateOnPush = true
+
+# The default access restriction for new repositories.
+# Valid values are NONE, PUSH, CLONE, VIEW
+#  NONE = anonymous view, clone, & push
+#  PUSH = anonymous view & clone and authenticated push
+#  CLONE = anonymous view, authenticated clone & push
+#  VIEW = authenticated view, clone, & push
+#
+# SINCE 1.0.0
+git.defaultAccessRestriction = NONE
+
+# The default authorization control for new repositories.
+# Valid values are AUTHENTICATED and NAMED
+#  AUTHENTICATED = any authenticated user is granted restricted access
+#  NAMED = only named users/teams are granted restricted access
+#
+# SINCE 1.1.0
+git.defaultAuthorizationControl = NAMED
+
+# Enable JGit-based garbage collection. (!!EXPERIMENTAL!!)
+#
+# USE AT YOUR OWN RISK!
+#
+# If enabled, the garbage collection executor scans all repositories once a day
+# at the hour of your choosing.  The GC executor will take each repository "offline",
+# one-at-a-time, to check if the repository satisfies it's GC trigger requirements.
+#
+# While the repository is offline it will be inaccessible from the web UI or from
+# any of the other services (git, rpc, rss, etc).
+#
+# Gitblit's GC Executor MAY NOT PLAY NICE with the other Git kids on the block,
+# especially on Windows systems, so if you are using other tools please coordinate
+# their usage with your GC Executor schedule or do not use this feature.
+#
+# The GC algorithm complex and the JGit team advises caution when using their
+# young implementation of GC.
+#
+# http://wiki.eclipse.org/EGit/New_and_Noteworthy/2.1#Garbage_Collector_and_Repository_Storage_Statistics
+#
+# EXPERIMENTAL
+# SINCE 1.2.0
+# RESTART REQUIRED
+git.enableGarbageCollection = false
+
+# Hour of the day for the GC Executor to scan repositories.
+# This value is in 24-hour time.
+#
+# SINCE 1.2.0
+git.garbageCollectionHour = 0
+
+# The default minimum total filesize of loose objects to trigger early garbage
+# collection.
+#
+# You may specify a custom threshold for a repository in the repository's settings.
+# Common unit suffixes of k, m, or g are supported.
+#
+# SINCE 1.2.0
+git.defaultGarbageCollectionThreshold = 500k
+
+# The default period, in days, between GCs for a repository.  If the total filesize
+# of the loose object exceeds *git.garbageCollectionThreshold* or the repository's
+# custom threshold, this period will be short-circuited. 
+#
+# e.g. if a repository collects 100KB of loose objects every day with a 500KB
+# threshold and a period of 7 days, it will take 5 days for the loose objects to
+# be collected, packed, and pruned.
+#
+# OR
+#
+# if a repository collects 10KB of loose objects every day with a 500KB threshold
+# and a period of 7 days, it will take the full 7 days for the loose objects to be
+# collected, packed, and pruned.
+#
+# You may specify a custom period for a repository in the repository's settings.
+#
+# The minimum value is 1 day since the GC Executor only runs once a day.
+#
+# SINCE 1.2.0
+git.defaultGarbageCollectionPeriod = 7
+
+# Number of bytes of a pack file to load into memory in a single read operation.
+# This is the "page size" of the JGit buffer cache, used for all pack access
+# operations. All disk IO occurs as single window reads. Setting this too large
+# may cause the process to load more data than is required; setting this too small
+# may increase the frequency of read() system calls.
+#
+# Default on JGit is 8 KiB on all platforms.
+#
+# Common unit suffixes of k, m, or g are supported.
+# Documentation courtesy of the Gerrit project.
+#
+# SINCE 1.0.0
+# RESTART REQUIRED
+git.packedGitWindowSize = 8k
+
+# Maximum number of bytes to load and cache in memory from pack files. If JGit
+# needs to access more than this many bytes it will unload less frequently used
+# windows to reclaim memory space within the process. As this buffer must be shared
+# with the rest of the JVM heap, it should be a fraction of the total memory available.
+#
+# The JGit team recommends setting this value larger than the size of your biggest
+# repository. This ensures you can serve most requests from memory.
+#
+# Default on JGit is 10 MiB on all platforms.
+#
+# Common unit suffixes of k, m, or g are supported.
+# Documentation courtesy of the Gerrit project.
+#
+# SINCE 1.0.0
+# RESTART REQUIRED
+git.packedGitLimit = 10m
+
+# Maximum number of bytes to reserve for caching base objects that multiple deltafied
+# objects reference. By storing the entire decompressed base object in a cache Git
+# is able to avoid unpacking and decompressing frequently used base objects multiple times.
+#
+# Default on JGit is 10 MiB on all platforms. You probably do not need to adjust
+# this value.
+#
+# Common unit suffixes of k, m, or g are supported.
+# Documentation courtesy of the Gerrit project.
+#
+# SINCE 1.0.0
+# RESTART REQUIRED
+git.deltaBaseCacheLimit = 10m
+
+# Maximum number of pack files to have open at once. A pack file must be opened
+# in order for any of its data to be available in a cached window.
+#
+# If you increase this to a larger setting you may need to also adjust the ulimit
+# on file descriptors for the host JVM, as Gitblit needs additional file descriptors
+# available for network sockets and other repository data manipulation.
+#
+# Default on JGit is 128 file descriptors on all platforms.
+# Documentation courtesy of the Gerrit project.
+#
+# SINCE 1.0.0
+# RESTART REQUIRED
+git.packedGitOpenFiles = 128
+
+# Largest object size, in bytes, that JGit will allocate as a contiguous byte
+# array. Any file revision larger than this threshold will have to be streamed,
+# typically requiring the use of temporary files under $GIT_DIR/objects to implement
+# psuedo-random access during delta decompression.
+#
+# Servers with very high traffic should set this to be larger than the size of
+# their common big files. For example a server managing the Android platform
+# typically has to deal with ~10-12 MiB XML files, so 15 m would be a reasonable
+# setting in that environment. Setting this too high may cause the JVM to run out
+# of heap space when handling very big binary files, such as device firmware or
+# CD-ROM ISO images. Make sure to adjust your JVM heap accordingly. 
+#
+# Default is 50 MiB on all platforms.
+#
+# Common unit suffixes of k, m, or g are supported.
+# Documentation courtesy of the Gerrit project.
+#
+# SINCE 1.0.0
+# RESTART REQUIRED
+git.streamFileThreshold = 50m
+
+# When true, JGit will use mmap() rather than malloc()+read() to load data from
+# pack files.  The use of mmap can be problematic on some JVMs as the garbage
+# collector must deduce that a memory mapped segment is no longer in use before
+# a call to munmap() can be made by the JVM native code.
+#
+# In server applications (such as Gitblit) that need to access many pack files,
+# setting this to true risks artificially running out of virtual address space, 
+# as the garbage collector cannot reclaim unused mapped spaces fast enough.
+#
+# Default on JGit is false. Although potentially slower, it yields much more
+# predictable behavior.
+# Documentation courtesy of the Gerrit project.
+#
+# SINCE 1.0.0
+# RESTART REQUIRED
+git.packedGitMmap = false
+
+#
+# Groovy Integration
+#
+
+# Location of Groovy scripts to use for Pre and Post receive hooks.
+# Use forward slashes even on Windows!!
+# e.g. c:/groovy
+#
+# RESTART REQUIRED
+# SINCE 0.8.0
+# BASEFOLDER
+groovy.scriptsFolder = ${baseFolder}/groovy
+
+# Specify the directory Grape uses for downloading libraries.
+# http://groovy.codehaus.org/Grape
+#
+# RESTART REQUIRED
+# SINCE 1.0.0
+# BASEFOLDER
+groovy.grapeFolder = ${baseFolder}/groovy/grape
+
+# Scripts to execute on Pre-Receive.
+#
+# These scripts execute after an incoming push has been parsed and validated
+# but BEFORE the changes are applied to the repository.  You might reject a
+# push in this script based on the repository and branch the push is attempting
+# to change.
+#
+# Script names are case-sensitive on case-sensitive file systems.  You may omit
+# the traditional ".groovy" from this list if your file extension is ".groovy" 
+#
+# NOTE:
+# These scripts are only executed when pushing to *Gitblit*, not to other Git
+# tooling you may be using.  Also note that these scripts are shared between
+# repositories. These are NOT repository-specific scripts!  Within the script
+# you may customize the control-flow for a specific repository by checking the
+# *repository* variable.
+#
+# SPACE-DELIMITED
+# CASE-SENSITIVE
+# SINCE 0.8.0
+groovy.preReceiveScripts =
+
+# Scripts to execute on Post-Receive.
+#
+# These scripts execute AFTER an incoming push has been applied to a repository.
+# You might trigger a continuous-integration build here or send a notification.
+#
+# Script names are case-sensitive on case-sensitive file systems.  You may omit
+# the traditional ".groovy" from this list if your file extension is ".groovy" 
+#
+# NOTE:
+# These scripts are only executed when pushing to *Gitblit*, not to other Git
+# tooling you may be using.  Also note that these scripts are shared between
+# repositories. These are NOT repository-specific scripts!  Within the script
+# you may customize the control-flow for a specific repository by checking the
+# *repository* variable.
+# 
+# SPACE-DELIMITED
+# CASE-SENSITIVE
+# SINCE 0.8.0
+groovy.postReceiveScripts =
+
+# Repository custom fields for Groovy Hook mechanism
+#
+# List of key=label pairs of custom fields to prompt for in the Edit Repository
+# page.  These keys are stored in the repository's git config file in the 
+# section [gitblit "customFields"].  Key names are alphanumeric only.  These
+# fields are intended to be used for the Groovy hook mechanism where a script
+# can adjust it's execution based on the custom fields stored in the repository
+# config.
+#
+# e.g. "commitMsgRegex=Commit Message Regular Expression" anotherProperty=Another
+#
+# SPACE-DELIMITED
+# SINCE 1.0.0
+groovy.customFields = 
+
+#
+# Fanout Settings
+#
+
+# Fanout is a PubSub notification service that can be used by Sparkleshare
+# to eliminate repository change polling.  The fanout service runs in a separate
+# thread on a separate port from the Gitblit http/https application.
+# This service is provided so that Sparkleshare may be used with Gitblit in
+# firewalled environments or where reliance on Sparkleshare's default notifications
+# server (notifications.sparkleshare.org) is unwanted.
+#
+# This service maintains an open socket connection from the client to the
+# Fanout PubSub service. This service may not work properly behind a proxy server.  
+
+# Specify the interface for Fanout to bind it's service.
+# You may specify an ip or an empty value to bind to all interfaces.
+# Specifying localhost will result in Gitblit ONLY listening to requests to
+# localhost.
+#
+# SINCE 1.2.1
+# RESTART REQUIRED
+fanout.bindInterface = localhost
+
+# port for serving the Fanout PubSub service.  <= 0 disables this service.
+# On Unix/Linux systems, ports < 1024 require root permissions.
+# Recommended value: 17000
+#
+# SINCE 1.2.1
+# RESTART REQUIRED
+fanout.port = 0
+
+# Use Fanout NIO service.  If false, a multi-threaded socket service will be used.
+# Be advised, the socket implementation spawns a thread per connection plus the
+# connection acceptor thread.  The NIO implementation is completely single-threaded.
+#
+# SINCE 1.2.1
+# RESTART REQUIRED
+fanout.useNio = true
+
+# Concurrent connection limit.  <= 0 disables concurrent connection throttling.
+# If > 0, only the specified number of concurrent connections will be allowed
+# and all other connections will be rejected.
+#
+# SINCE 1.2.1
+# RESTART REQUIRED
+fanout.connectionLimit = 0
 
 #
 # Authentication Settings
@@ -50,13 +452,26 @@
 # SINCE 0.5.0
 web.allowCookieAuthentication = true
 
-# Either the path to a simple user properties file
+# Config file for storing project metadata
+#
+# SINCE 1.2.0
+# BASEFOLDER
+web.projectsFile = ${baseFolder}/projects.conf
+
+# Either the full path to a user config file (users.conf)
+# OR the full path to a simple user properties file (users.properties)
 # OR a fully qualified class name that implements the IUserService interface.
-# Any custom implementation must have a public default constructor.
+#
+# Alternative user services:
+#    com.gitblit.LdapUserService
+#    com.gitblit.RedmineUserService
+#
+# Any custom user service implementation must have a public default constructor.
 #
 # SINCE 0.5.0
 # RESTART REQUIRED
-realm.userService = users.properties
+# BASEFOLDER
+realm.userService = ${baseFolder}/users.conf
 
 # How to store passwords.
 # Valid values are plain, md5, or combined-md5.  md5 is the hash of password.
@@ -110,10 +525,78 @@
 # SINCE 0.7.0 
 web.enableRpcAdministration = false
 
+# Full path to a configurable robots.txt file.  With this file you can control
+# what parts of your Gitblit server respectable robots are allowed to traverse.
+# http://googlewebmastercentral.blogspot.com/2008/06/improving-on-robots-exclusion-protocol.html
+#
+# SINCE 1.0.0
+# BASEFOLDER
+web.robots.txt = ${baseFolder}/robots.txt
+
+# If true, the web ui layout will respond and adapt to the browser's dimensions.
+# if false, the web ui will use a 940px fixed-width layout.
+# http://twitter.github.com/bootstrap/scaffolding.html#responsive
+#
+# SINCE 1.0.0
+web.useResponsiveLayout = true
+
+# Allow Gravatar images to be displayed in Gitblit pages.
+#
+# SINCE 0.8.0
+web.allowGravatar = true
+
 # Allow dynamic zip downloads.
 #
 # SINCE 0.5.0   
 web.allowZipDownloads = true
+
+# If *web.allowZipDownloads=true* the following formats will be displayed for
+# download compressed archive links:
+#
+# zip   = standard .zip
+# tar   = standard tar format (preserves *nix permissions and symlinks)
+# gz    = gz-compressed tar
+# xz    = xz-compressed tar
+# bzip2 = bzip2-compressed tar
+#
+# SPACE-DELIMITED
+# SINCE 1.2.0
+web.compressedDownloads = zip gz
+
+# Allow optional Lucene integration. Lucene indexing is an opt-in feature.
+# A repository may specify branches to index with Lucene instead of using Git
+# commit traversal. There are scenarios where you may want to completely disable
+# Lucene indexing despite a repository specifying indexed branches.  One such
+# scenario is on a resource-constrained federated Gitblit mirror.
+#
+# SINCE 0.9.0
+web.allowLuceneIndexing = true
+
+# Allows an authenticated user to create forks of a repository
+#
+# set this to false if you want to disable all fork controls on the web site
+#
+web.allowForking = true
+
+# Controls the length of shortened commit hash ids
+#
+# SINCE 1.2.0
+web.shortCommitIdLength = 6
+
+# Use Clippy (Flash solution) to provide a copy-to-clipboard button.
+# If false, a button with a more primitive JavaScript-based prompt box will
+# offer a 3-step (click, ctrl+c, enter) copy-to-clipboard alternative.
+#
+# SINCE 0.8.0
+web.allowFlashCopyToClipboard = true
+
+# Default maximum number of commits that a repository may contribute to the
+# activity page, regardless of the selected duration.  This setting may be valuable
+# for an extremely busy server.  This value may also be configed per-repository
+# in Edit Repository. 0 disables this throttle.
+#
+# SINCE 1.2.0
+web.maxActivityCommits = 0
 
 # Default number of entries to include in RSS Syndication links
 #
@@ -127,6 +610,15 @@
 # SINCE 0.5.2
 web.showRepositorySizes = true
 
+# List of custom regex expressions that can be displayed in the Filters menu
+# of the Repositories and Activity pages.  Keep them very simple because you
+# are likely to run into encoding issues if they are too complex.
+#
+# Use !!! to separate the filters 
+#
+# SINCE 0.8.0
+web.customFilters =
+
 # Show federation registrations (without token) and the current pull status
 # to non-administrator users. 
 #
@@ -138,6 +630,7 @@
 # Specifying "gitblit" uses the internal login message.
 #
 # SINCE 0.7.0
+# BASEFOLDER
 web.loginMessage = gitblit
 
 # This is the message displayed above the repositories table.
@@ -145,7 +638,27 @@
 # Specifying "gitblit" uses the internal welcome message.
 #
 # SINCE 0.5.0
+# BASEFOLDER
 web.repositoriesMessage = gitblit
+
+# Ordered list of charsets/encodings to use when trying to display a blob.
+# If empty, UTF-8 and ISO-8859-1 are used.  The server's default charset
+# is always appended to the encoding list.  If all encodings fail to cleanly
+# decode the blob content, UTF-8 will be used with the standard malformed
+# input/unmappable character replacement strings.
+# 
+# SPACE-DELIMITED
+# SINCE 1.0.0
+web.blobEncodings = UTF-8 ISO-8859-1
+
+# Manually set the default timezone to be used by Gitblit for display in the 
+# web ui.  This value is independent of the JVM timezone.  Specifying a blank
+# value will default to the JVM timezone.
+# e.g. America/New_York, US/Pacific, UTC, Europe/Berlin
+#
+# SINCE 0.9.0
+# RESTART REQUIRED
+web.timezone =
 
 # Use the client timezone when formatting dates.
 # This uses AJAX to determine the browser's timezone and may require more
@@ -156,17 +669,28 @@
 # RESTART REQUIRED
 web.useClientTimezone = false
 
+# Time format
+# <http://download.oracle.com/javase/6/docs/api/java/text/SimpleDateFormat.html>
+#
+# SINCE 0.8.0
+web.timeFormat = HH:mm
+
 # Short date format
 # <http://download.oracle.com/javase/6/docs/api/java/text/SimpleDateFormat.html>
 #
 # SINCE 0.5.0
 web.datestampShortFormat = yyyy-MM-dd
 
+# Long date format
+#
+# SINCE 0.8.0
+web.datestampLongFormat = EEEE, MMMM d, yyyy
+
 # Long timestamp format
 # <http://download.oracle.com/javase/6/docs/api/java/text/SimpleDateFormat.html>
 #
 # SINCE 0.5.0
-web.datetimestampLongFormat = EEEE, MMMM d, yyyy h:mm a z
+web.datetimestampLongFormat = EEEE, MMMM d, yyyy HH:mm Z
 
 # Mount URL parameters
 # This setting controls if pretty or parameter URLs are used.
@@ -186,6 +710,8 @@
 #
 # <https://issues.apache.org/jira/browse/WICKET-1303>
 # <http://tomcat.apache.org/security-6.html#Fixed_in_Apache_Tomcat_6.0.10>
+# Add *-Dorg.apache.tomcat.util.buf.UDecoder.ALLOW_ENCODED_SLASH=true* to your
+# *CATALINA_OPTS* or to your JVM launch parameters
 #
 # SINCE 0.5.2
 web.forwardSlashCharacter = /
@@ -195,6 +721,7 @@
 # e.g.
 # web.otherUrls = ssh://localhost/git/{0} git://localhost/git/{0}
 #
+# SPACE-DELIMITED
 # SINCE 0.5.0
 web.otherUrls = 
 
@@ -211,6 +738,12 @@
 #
 # SINCE 0.5.0
 web.repositoryRootGroupName = main
+
+# Display the repository swatch color next to the repository name link in the 
+# repositories list. 
+#
+# SINCE 0.8.0
+web.repositoryListSwatches = true
 
 # Choose the diff presentation style: gitblt, gitweb, or plain
 #
@@ -234,6 +767,12 @@
 # SINCE 0.5.0 
 web.generateActivityGraph = true
 
+# The number of days to show on the activity page.
+# Value must exceed 0 else default of 14 is used
+#
+# SINCE 0.8.0
+web.activityDuration = 14
+
 # The number of commits to display on the summary page
 # Value must exceed 0 else default of 20 is used
 #
@@ -254,11 +793,17 @@
 # SINCE 0.5.0
 web.itemsPerPage = 50
 
+# Registered file extensions to ignore during Lucene indexing
+#
+# SPACE-DELIMITED
+# SINCE 0.9.0
+web.luceneIgnoreExtensions = 7z arc arj bin bmp dll doc docx exe gif gz jar jpg lib lzh odg odf odt pdf ppt png so swf xcf xls xlsx zip
+
 # Registered extensions for google-code-prettify
 #
 # SPACE-DELIMITED
 # SINCE 0.5.0
-web.prettyPrintExtensions = c cpp cs css htm html java js php pl prefs properties py rb sh sql xml vb
+web.prettyPrintExtensions = c cpp cs css frm groovy htm html java js php pl prefs properties py rb scala sh sql xml vb
 
 # Registered extensions for markdown transformation
 #
@@ -348,6 +893,17 @@
 # SINCE 0.6.0
 mail.adminAddresses = 
 
+# List of email addresses for sending push email notifications.
+#
+# This key currently requires use of the sendemail.groovy hook script.
+# If you set sendemail.groovy in *groovy.postReceiveScripts* then email
+# notifications for all repositories (regardless of access restrictions!)
+# will be sent to these addresses.
+#
+# SPACE-DELIMITED
+# SINCE 0.8.0
+mail.mailingLists =
+
 #
 # Federation Settings
 # SINCE 0.6.0
@@ -392,7 +948,8 @@
 # Use forward slashes even on Windows!!
 #
 # SINCE 0.6.0
-federation.proposalsFolder = proposals
+# BASEFOLDER
+federation.proposalsFolder = ${baseFolder}/proposals
 
 # The default pull frequency if frequency is unspecified on a registration
 #
@@ -465,6 +1022,139 @@
 #federation.example1.mergeAccounts = true
 
 #
+# Advanced Realm Settings
+#
+
+# URL of the LDAP server.
+# To use encrypted transport, use either ldaps:// URL for SSL or ldap+tls:// to
+# send StartTLS command.
+#
+# SINCE 1.0.0
+realm.ldap.server = ldap://localhost
+
+# Login username for LDAP searches.
+# If this value is unspecified, anonymous LDAP login will be used.
+# 
+# e.g. mydomain\\username
+#
+# SINCE 1.0.0
+realm.ldap.username = cn=Directory Manager
+
+# Login password for LDAP searches.
+#
+# SINCE 1.0.0
+realm.ldap.password = password
+
+# The LdapUserService must be backed by another user service for standard user
+# and team management.
+# default: users.conf
+#
+# SINCE 1.0.0
+# RESTART REQUIRED
+# BASEFOLDER
+realm.ldap.backingUserService = ${baseFolder}/users.conf
+
+# Delegate team membership control to LDAP.
+#
+# If true, team user memberships will be specified by LDAP groups.  This will
+# disable team selection in Edit User and user selection in Edit Team.
+#
+# If false, LDAP will only be used for authentication and Gitblit will maintain
+# team memberships with the *realm.ldap.backingUserService*.
+#
+# SINCE 1.0.0
+realm.ldap.maintainTeams = false
+
+# Root node for all LDAP users
+#
+# This is the root node from which subtree user searches will begin.
+# If blank, Gitblit will search ALL nodes.
+#
+# SINCE 1.0.0
+realm.ldap.accountBase = OU=Users,OU=UserControl,OU=MyOrganization,DC=MyDomain
+
+# Filter criteria for LDAP users
+#
+# Query pattern to use when searching for a user account. This may be any valid 
+# LDAP query expression, including the standard (&) and (|) operators.
+#
+# Variables may be injected via the ${variableName} syntax.
+# Recognized variables are:
+#    ${username} - The text entered as the user name
+#
+# SINCE 1.0.0
+realm.ldap.accountPattern = (&(objectClass=person)(sAMAccountName=${username}))
+
+# Root node for all LDAP groups to be used as Gitblit Teams
+#
+# This is the root node from which subtree team searches will begin.
+# If blank, Gitblit will search ALL nodes.  
+#
+# SINCE 1.0.0
+realm.ldap.groupBase = OU=Groups,OU=UserControl,OU=MyOrganization,DC=MyDomain
+
+# Filter criteria for LDAP groups
+#
+# Query pattern to use when searching for a team. This may be any valid 
+# LDAP query expression, including the standard (&) and (|) operators.
+#
+# Variables may be injected via the ${variableName} syntax.
+# Recognized variables are:
+#    ${username} - The text entered as the user name
+#    ${dn} - The Distinguished Name of the user logged in
+#
+# All attributes from the LDAP User record are available. For example, if a user
+# has an attribute "fullName" set to "John", "(fn=${fullName})" will be 
+# translated to "(fn=John)".
+#
+# SINCE 1.0.0
+realm.ldap.groupMemberPattern = (&(objectClass=group)(member=${dn}))
+
+# LDAP users or groups that should be given administrator privileges.
+#
+# Teams are specified with a leading '@' character.  Groups with spaces in the
+# name can be entered as "@team name".
+#
+# e.g. realm.ldap.admins = john @git_admins "@git admins"
+#
+# SPACE-DELIMITED
+# SINCE 1.0.0
+realm.ldap.admins = @Git_Admins
+
+# Attribute(s) on the USER record that indicate their display (or full) name.
+# Leave blank for no mapping available in LDAP.
+#
+# This may be a single attribute, or a string of multiple attributes.  Examples:
+#  displayName - Uses the attribute 'displayName' on the user record
+#  ${personalTitle}. ${givenName} ${surname} - Will concatenate the 3 
+#       attributes together, with a '.' after personalTitle
+#
+# SINCE 1.0.0
+realm.ldap.displayName = displayName
+
+# Attribute(s) on the USER record that indicate their email address.
+# Leave blank for no mapping available in LDAP.
+#
+# This may be a single attribute, or a string of multiple attributes.  Examples:
+#  email - Uses the attribute 'email' on the user record
+#  ${givenName}.${surname}@gitblit.com -Will concatenate the 2 attributes
+#       together with a '.' and '@' creating something like first.last@gitblit.com 
+#
+# SINCE 1.0.0
+realm.ldap.email = email
+
+# The RedmineUserService must be backed by another user service for standard user
+# and team management.
+# default: users.conf
+#
+# RESTART REQUIRED
+# BASEFOLDER
+realm.redmine.backingUserService = ${baseFolder}/users.conf
+
+# URL of the Redmine.
+realm.redmine.url = http://example.com/redmine
+
+#
 # Server Settings
 #
 
@@ -472,7 +1162,8 @@
 #
 # SINCE 0.5.0
 # RESTART REQUIRED
-server.tempFolder = temp
+# BASEFOLDER
+server.tempFolder = ${baseFolder}/temp
 
 # Use Jetty NIO connectors.  If false, Jetty Socket connectors will be used.
 #
@@ -503,6 +1194,14 @@
 # RESTART REQUIRED
 server.httpsPort = 8443
 
+# Port for serving an Apache JServ Protocol (AJP) 1.3 connector for integrating
+# Gitblit GO into an Apache HTTP server setup.  <= 0 disables this connector.
+# Recommended value: 8009
+#
+# SINCE 0.9.0
+# RESTART REQUIRED
+server.ajpPort = 0
+
 # Specify the interface for Jetty to bind the standard connector.
 # You may specify an ip or an empty value to bind to all interfaces.
 # Specifying localhost will result in Gitblit ONLY listening to requests to
@@ -521,15 +1220,56 @@
 # RESTART REQUIRED
 server.httpsBindInterface = localhost
 
+# Specify the interface for Jetty to bind the AJP connector.
+# You may specify an ip or an empty value to bind to all interfaces.
+# Specifying localhost will result in Gitblit ONLY listening to requests to
+# localhost.
+#
+# SINCE 0.9.0
+# RESTART REQUIRED
+server.ajpBindInterface = localhost
+
+# Alias of certificate to use for https/SSL serving.  If blank the first
+# certificate found in the keystore will be used. 
+#
+# SINCE 1.2.0
+# RESTART REQUIRED
+server.certificateAlias = localhost
+
 # Password for SSL keystore.
 # Keystore password and certificate password must match.
 # This is provided for convenience, its probably more secure to set this value
 # using the --storePassword command line parameter.
 #
+# If you are using the official JRE or JDK from Oracle you may not have the
+# JCE Unlimited Strength Jurisdiction Policy files bundled with your JVM.  Because
+# of this, your store/key password can not exceed 7 characters.  If you require
+# longer passwords you may need to install the JCE Unlimited Strength Jurisdiction
+# Policy files from Oracle.
+#
+# http://www.oracle.com/technetwork/java/javase/downloads/index.html
+#
+# Gitblit and the Gitblit Certificate Authority will both indicate if Unlimited
+# Strength encryption is available.
+#
 # SINCE 0.5.0
 # RESTART REQUIRED
 server.storePassword = gitblit
 
+# If serving over https (recommended) you might consider requiring clients to
+# authenticate with ssl certificates.  If enabled, only https clients with the
+# a valid client certificate will be able to access Gitblit.
+#
+# If disabled, client certificate authentication is optional and will be tried
+# first before falling-back to form authentication or basic authentication.
+#
+# Requiring client certificates to access any of Gitblit may be too extreme,
+# consider this carefully.
+#
+# SINCE 1.2.0
+# RESTART REQUIRED
+server.requireClientCertificates = false
+
 # Port for shutdown monitor to listen on.
 #
 # SINCE 0.5.0

--
Gitblit v1.9.1